How To Use
CAUTION: Do not plug in cleaner until you understand all controls and features.
1
2
3
4
5
13
6
7
8
9
11
10
1.Cord Retainer. To use, push electrical cord down into cord retainer.
2.ON/OFF Switch. International symbol I means On, International symbol O means Off.
3.Bag Cover Latch. When bag cover latch is pointing to the left, the bag cover is unlocked. When bag cover latch is pointing to the right the bag cover is locked. See the locked/ unlocked symbols on the unit.
4.Micron Filter Compartment. To open, slide micron filter door up and pull away from unit. To close, place micron filter door at top of opening pressing against unit, slide down into place.
5.Bag Change Indicator. The bag change indicator is to remind you to change the bag. The indicator on the bag cover moves down the window as the airflow through the bag decreases.
NOTE: Certain types of fine particles like powder, plaster dust, or fine road dust can restrict airflow very quickly. The fine particles will decrease performance even before the bag appears to be full. Change the dust bag to restore maximum performance.
6.Disposable Dust Bag Compartment. To open, turn bag cover latch (3) to the left pointing to unlock symbol, then pull top of dust bag cover out and away from unit. To close, place dust bag cover tabs (at the bottom) in groove at the bottom of compartment, rotating dust bag cover up and against unit. Then turn bag cover latch to the right pointing to the lock symbol.
7.Stair Handle. To use when cleaning stairs.
8.Handle Release. Step on handle release. Pull handle back to a comfortable position. Press release again to lower handle further to clean under furniture.
9.Light Bulb Compartment. To gain access to light bulb compartment remove the two screws in the lens.
10. Brush Roll Belt Window. To check condition of belt watch to see if white dots on belt are moving through the window. This indicates the brush roll is turning.
11.Screws to release hood. Remove these screws to release hood and give access to brush roll belt area.
12.Cleaner Height Setting. The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of floor surface. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.
11 WARNING: Avoid injury. Keep loose clothing, hair, fingers,
| and all other parts of body away from any moving | |
| part (such as the revolving brush). Turn off the | |
12 | switch and unplug the cleaner before changing | |
the cleaner height setting. | ||
|
13.Extension Wands. Use these wands on the end of the hose for added cleaning reach.
7
