Step C Replace Bag Cover
NOTE: Make sure bag is properly installed. Check to see bag has not shifted away from bag inlet during shipping. See page 13 for further instructions.
Bag Cover
Latch
Bag Inlet
Tabs
Groove
4.Replace front cover by aligning tabs at bottom of front cover into groove on cleaner. Pivot front cover up against cleaner and rotate the bag cover latch to the right to secure.
Step D Store Accessories
Dusting/ | Nesting | |
Upholstery | ||
Extension | ||
Brush | ||
Wands | ||
|
Crevice
Tool
Step E Store Electrical Cord
5
Cord
Retainer
6
Cord
Hook
6
Cord
Hook
6
5.You will find your cord retainer on the handle above the upper cord hook. Firmly push the electrical cord down into the cord retainer. This will place the cord out of the way the next time you vacuum.
6.Next wind the cord around the two cord hooks on the back of the cleaner.
7.Secure the plug to the cord to prevent unwinding.