Reference: Detailed Instructions For Making A Master TV

IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING...

To set up a master TV you will need to know how to enter the TV Installer menu and make changes to

the default values as required. If necessary, famil- iarize yourself with the TV Installer menu and how to make and save changes in the menu, before attempting to

clone the TV Master TV setup.

You will also need an LG Installer remote control similar to the one shown in the front of this manual. The installer remote must have a “Source” button or its equivalent. The remote shown in this manual has a “INPUT” button -- this button serves the purpose of a Source button.

Finally, the TV’s clonable features need to be set up. This is a critical step. If the Master TV display panel’s clonable features

like adding channel icons or channel labels, digital font options etc., are not correctly added, then the cloned TVs will all have problems.

As the cloning procedure is being performed, specific steps need to be done at the indicated times to achieve the desired result. Be sure to do each task as indicated. If a procedure or step is left out or not performed completely, cloning may not work. At each step, pay attention to assure the TV screen shows the proper message when cloning. If the message indicated does not appear, there is a problem with that step and cloning may not be successful. Cloning is only possible when the signal source is an Analog channel, not a digital channel.

Making a Master TV

Detailed Instructions

The following describes the procedure for preparing a Master TV for cloning and the procedure for adding Channel Icons and/or Labels.

Note 1: Disconnect all Aux inputs. Under certain conditions, Auto Tuning Channel Search is disabled if there is an Aux input active.

Note 2: Under certain conditions, changes to the input mode of the RGB inputs will not take effect until the power is cycled (TV is turned Off and On). To avoid confusion, disconnect all RGB inputs before entering the Installer menu.

1.Enter the TV installer menu.

a.Reset the internal controller to factory default by access- ing installer menu item 117 FACT DEFAULT, set it to 1 and press “ENTER”. The value will change back to 0 after the TV’s internal controller has been restored to factory default con- dition. This step will ensure that the TV channel memory will be the active channel list. Check the Status LED. If it is blinking rapidly then the TV channel map is in use.

b.Within the Installer menu, set the Installer menu items to the configuration required of your institution.

c.It is important to set the tuning band at this time, see Installer menu item 03 BAND/AFC.

d.Set Installer menu item 28 – CH OVERIDE to 001 to allow access to the Auto Tuning and Ch. Edit features in the Channel Menu. Exit the Installer menu.

2.Access the Master TV menus and set the clonable options on the menus to the desired configuration. Refer to the

Clonable Menu Features Chart in this manual.

3.Run Auto Tuning to find analog and digital channels.

4.Enter the Channel Edit menu and edit the channel lineup to include the Free-To-Guest Channels only.

5.Assign ICONs to the channels using the Channel Label Menu. Note: You can add Channel ICONS typically network logos like ABC, NBC, PBS etc. in this step. Or, in Step 7, add Channel ICONS or labels for channels without Icons.

6.Transfer the TV setup: Enter the TV installer menu. Press ‘2’, ‘5’, ‘5’, ‘MENU’ to start the transfer of the TV’s setup to the internal controller. Once the transfer is complete, the sys- tem will exit the Installer menu. Check the Status LED inside the TV. It should be blinking slowly (1 blink per second).

7.Edit/Add Channel ICONs and Channel Labels as needed.

Enter Installer menu. With menu displayed, press 2-5-4 + MENU. See next page for detailed instructions:

-Editing/Adding Channel ICON and Labels on Master TV

-Changing a Channel’s ICON on Master TV

-Changing/Adding Channel Labels on Master TV

-Changing Source Labels on Master TV

8.Verify Master TV setup and feature configuration:

•Did you add Channel ICONS?

•Did you add Channel Labels?

•Did you add Source Labels?

•Did you adjust all TV menu options as required?

After verifying master setup, enter the TV Installer menu and set Installer menu item 28 CH OVERIDE to 000. Press ENTER to remove and exit the Installer menu.

P A G E 3 2

206-4118

Page 140 Page 142
Page 141
Image 141
LG Electronics 42LH260H, 42LH255H, 42LH250H, 37LH250H, 37LH260H Reference Detailed Instructions For Making a Master TV
Page 140 Page 142

42LH250H, 37LH255H, 42LH260H, 42LH255H, 32LH240H specifications

LG Electronics is renowned for its innovative television technology, and models such as the SAC34026004, 42LH260H, 37LH255H, 32LH250H, and 32LH255H embody this legacy. Each of these models comes equipped with features and technologies that provide an immersive viewing experience.

The SAC34026004 model serves as a versatile option for consumers looking for an efficient entertainment solution. This television integrates advanced LED technology, which enhances brightness and color accuracy, making it suitable for various lighting conditions. Additionally, it offers smart features that facilitate seamless access to streaming services, allowing viewers to enjoy their favorite content with ease.

Turning to the 42LH260H, this television boasts a 42-inch screen that strikes an ideal balance between size and functionality. With a Full HD resolution of 1920 x 1080 pixels, it ensures clarity and vibrant colors in all types of media. The model is equipped with HDMI inputs, granting users the ability to connect multiple devices effortlessly. Its sleek design also makes it an attractive addition to any room.

The 37LH255H model presents an excellent choice for consumers who prefer a slightly smaller screen. With a 37-inch display, it maintains high-quality visuals with a sharp and vivid picture. The model includes both digital and analog tuners, offering flexibility in content viewing. Its energy-efficient features allow consumers to enjoy high-performance viewing without increasing energy costs significantly.

The 32LH250H and 32LH255H models cater to those seeking compact alternatives without compromising quality. Both models include a 32-inch display that fits comfortably in smaller spaces, making them ideal for bedrooms or kitchens. Like their larger counterparts, these televisions utilize LED technology to provide exceptional picture quality.

In summary, the LG Electronics SAC34026004, 42LH260H, 37LH255H, 32LH250H, and 32LH255H models showcase a commitment to quality, innovation, and user-friendly features. Each television integrates advanced technologies designed to enhance the home viewing experience, making them suitable for a variety of environments and preferences. Whether it is through sharp visuals, energy efficiency, or smart capabilities, LG continues to set the standard in the television market.
Top Page Image Contents