EXTERNAL CONTROL DEVICE SETUP 25
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the product back panel.
RS 232C IN (CONTROL & SERVICE)
NOTE
••RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C connection cables are not supplied with the product.
Type of Connector; D-Sub 9-Pin Male
15
6 9
RS-232C IN
(CONTROL & SERVICE)
1No connection
2RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5GND
6DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
ENGLISH
