LG Electronics 32LG30, 60PG3042PG20, 50PG20, 42PG30, 42PG10, 42LG30, 37LG50, 37LG30, 32LG50, 26LG30 113

09. Tint (Command: k j)

G To adjust the screen tint.

You can also adjust tint in the PICTURE menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 ~ Green : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[j][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

G To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

G To select OSD (On Screen Display) on/off when controlling remotely.

Transmission

[k][l][ ][Set ID][ ][Data][Cr]

Data 00 : OSD off 01 : OSD on

Ack

[l][ ][Set ID][ ][OK/NG][Data][x]

12 . Remote control lock mode (Command: k m)

GTo lock the front panel controls on the monitor and remote control.

Transmission

[k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Ack

[m][ ][Set ID][ ][OK/NG][Data][x]

*If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.

13. Balance (Command: k t)

G To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission

[k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 ~ Max : 64

* Refer to ‘Real data mapping 1’. See page 114.

Ack

[t][ ][Set ID][ ][OK/NG][Data][x]

14. Colour Temperature (Command: k u)

G To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu.

Transmission

[k][u][ ][Set ID][ ][Data][Cr]

Data 00: Medium 01: Cool 02: Warm

Ack

[u][ ][Set ID][ ][OK/NG][Data][x]

15. Abnormal State (Command: k z)

G To recognize an abnormal state.

Transmission

[k][z][ ][Set ID][ ][FF][ ][Cr]

Data FF : Read

Ack

[z][ ][Set ID][ ][OK/NG][Data][x]

Data 00: Normal (Power on and signal exist) 01: No signal (Power on)

02:Turn the monitor off by remote control

03:Turn the monitor off by sleep time function

04:Turn the monitor off by RS-232C function

05:5V down

06:AC down

07:Turn the monitor off by Fan Alarm function

08:Turn the monitor off by Off time function

09:Turn the monitor off by Auto sleep function a: Turn the monitor off by AV Board detect

* This function is “read only”.

APPENDIX

113

Downloaded From TV-Manual.com Manuals