LG Electronics 65EC9700 owner manual ChannelProgramme Add/DelSkip Command m b, ‡ For Japan Model

10EXTERNAL CONTROL DEVICE SETUP

ENGLISH

Number

-22 : Antenna TV (DTV) – Don’t Use Physical Channel Number

-26 : Cable TV (CADTV) - Don’t Use Physical Channel Number

-46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel)

Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).

* Tune Command Examples:

1.Tune to the Analog cable (NTSC) channel 35. Set ID = All = 00

Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01

Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02

2.Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00

Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07

*This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x]

2.Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00

Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22 Total = ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][Data 03][Data 04][Data 05]

[x][a][ ][Set ID][ ][NG][Data 00][x]

21.Channel(Programme) Add/Del(Skip) (Command: m b)

ŹTo skip current channel(programme) for next time. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

*Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.

‡ For Japan Model

ŹTo tune channel to following physical/major/minor number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] * Digital Antenna/Satellite

Data 00: xx (Don't care)

[Data 01][Data 02]: Major Channel Number

Data 01: High byte Channel Data

Data 02: Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite)

Data 03: High byte Channel Data

Data 04: Low byte Channel Data

Data 05 : Input Source (Digital/Satellite for Japan)

-02 : Antenna TV (DTV)

-07 : BS (Broadcasting Satellite)

-08 : CS1 (Communication Satellite 1)

-09 : CS2 (Communication Satellite 2)

* Tune Command Examples:

1Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00

Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01

22. Key (Command: m c)

ŹTo send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

23. Control Backlight (Command: m g)

‡ For LCD TV / LED TV

ŹTo control the backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g)

‡ For Plasma TV

ŹTo control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]