Getting Started

Selecting the Scan Contrast

To select the Scan Contrast:

Press the Contrast key until the required contrast mode is indicated by a Contrast LED

Note: When a Contrast LED is not illuminated, the Contrast setting is Normal.

The Contrast setting adjusts the print darkness of the copy or transmitted document. The default contrast setting is normal on base machine. The machine returns to the default setting after each transmission.

Refer to the System Administrator’s Guide for details about changing the default setting for contrast.

The following table describes the available contrast selections

Contrast selection

Description

 

 

Normal

For documents printed with ordinary image density.

 

Selected when the Contrast LED is off.

 

 

Lighten

For documents with dark print that need to be

 

adjusted to print lighter.

 

 

Darken

For documents with light or faint print that need to be

 

adjusted to print darker.

 

 

WorkCentre Pro 665/685/765/785

4-13

Page 49
Image 49
LG Electronics 665, 765, 785, 685 manual Selecting the Scan Contrast, Contrast selection Description