FIGURE 5
Separate the two halves of the rifle.
FIGURE 6
Remove the bolt slide
and breech bolt together
DISASSEMBLY —
1.Unscrew and remove takedown screw on left side of receiver (see Figure 4).
2.Separate the gun into two halves by pulling the butt stock downward to the rear (see Figure 5).
FIGURE 7
Receiver | Breech bolt | Bolt slide |
3.The bolt slide may now be removed by sliding rearward out of receiver (see Figure 6). Use care to prevent the cam pin from dropping free of the bolt.
4.Bolt and bolt slide may now be separated (see Figure 7).
9