Magazine tube

FIGURE 8

Takedown screw

FIGURE 10

Barrel/Forearm half

Cam pin

Bolt slide

Breech bolt

Buttstock half

FIGURE 9

Make sure the breech bolt and bolt slide fit into the rails in the receiver

Your Model 9422 will now be in these pieces: (see Figure 8):

• Barrel/forearm half

• Cam pin

• Buttstock half

• Magazine tube

• Breech bolt

• Takedown screw

• Bolt slide

 

Insert the cam pin into the hole in the breech bolt

Center the cam pin in the hole

REASSEMBLY —

1.Assemble bolt and bolt slide, keeping cam pin centered (see Figure 9).

2.Insert assembly into the receiver from rear, pushing for- ward until it locks (see Figure 10).

3.Pull hammer back to full-cock position and close finger lever.

10