LG Electronics C1300 manual Reset Setting, Gprs Attach Menu, Reset Access Point Menu

Settings

GPRS Attach (Menu 9.5.2)

If you select Power On and you are in a network that supports packet data, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive e-mail, is quicker. If you select When Needed, the phone will use a packet data connection only if you start an application or action that needs it. The GPRS connection is closed after it is not used by any application.

Note If there is no GPRS coverage and you have chosen Power On, the phone will periodically try to establish a packet data connection.

Access Point (Menu 9.5.3)

This feature sets the Profile during the WAP and MMS connections. Please see page 73 for further detail. The Profile menu under the Access Point feature will display Add, Delete and Editor options, but the reason why Activate option is not available is because there is no way of knowing whether WAP or MMS will be used to activate the content.

Reset Access Point (Menu 9.5.4)

This allows Profile information to be restored to original setting. For example, this option will restore the Profile that has been deleted by the Delete All selection from the Access Point (Menu 4.4) submenu.

Reset Setting Menu 9.6

You can easily reset your phone to its default configuration. To do so, proceed, as follows.

1.Select the Reset Settings menu option.

2.Enter the 4-digit phone password.

Note The password is preset to 0000.

98