Electronic programmer
4
5 
7
6 
8
2 1 3
Fig. 4
Electrolux 
1. Push button for selecting a function
2. Decreasing control button “ ”
3.Increasing control button “ ”
4.Display
5.“Cooking Duration” pilot lamp 
6.“End of cooking” pilot lamp
7.“Minute minder” pilot lamp
8.“Time of day” pilot lamp 
The oven will only work if the time of day has been set.
However, the oven can also be operated without any programme.
Setting the time of day
When the power supply is switched on, or after a
power failure, the “Time of day” pilot lamp |
|
| will flash |
| |||
on the display. |
|
| |
To set the correct time of day:
1.Press button “ ” or “ ”.
2.After the setting is carried out, wait for 5 seconds: the
“Time of day” pilot lamp |
|
| will go out and the |
| |||
|
|
display will show the set time. The appliance is rea- dy for use.
To reset the correct time of day:
1.Press button
repeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above.
The time of day can only be reset if no automatic
function (cooking duration | or end of cooking |
) has been set. |
|
35
