LG Electronics CU400 Turning Your Phone On and Off, If the battery fails to charge completely

Models: CU400

1 112
Download 112 pages 63.39 Kb
Page 23
Image 23

nWarning

The travel charger must be unplugged before you remove the battery, otherwise, the phone could be damaged.

3.When charging is finished, disconnect the travel charger from the phone by pressing on the grey tabs on both sides of the connector while pulling the connector out.

nNote

]If your phone is powered on while charging, you’ll see the bars on the battery indicator icon cycle.

]While a phone is being charged, ‘Charging..’ message is shown in the idle screen.

]When it is completed, ‘Charge complete’ message is displayed in the same place.

If a user cannot see the ‘Charge complete’ message, even if battery icons are show 3 blocks, it means the phone is not charged fully yet.

Getting Started

If the battery fails to charge completely:

]After turning the phone on and off, please attempt to recharge the battery.

]After detaching and reattaching the battery, please attempt to recharge the battery.

Turning Your Phone On and Off

1.Hold down the [END] key until the phone switches on.

2.If the phone asks for a PIN, enter the PIN and press

the key.

The phone searches for your network and after finding it goes to the idle screen as illustrated below. From the idle screen, you can make or receive a call.

19

Page 23
Image 23
LG Electronics CU400 manual Turning Your Phone On and Off, If the battery fails to charge completely