LG Electronics DH4220S owner manual HDMI Out Connection, Connecting

Connecting 15

HDMI Out Connection

If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable).

Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

,,Note

yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.

yy When you connect a HDMI or DVI compatible device make sure of the following:

-Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/ DVI device and leave it for around 30 seconds, then switch on this unit.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720 x 480i (or 576i), 720 x 480p (or 576p),

1, 280 x 720p, 1,920 x 1,080i or 1,920 x 1,080p video input.

yy Not all HDCP-compatible HDMI or DVI devices will work with this unit.

-The picture will not be displayed properly with non-HDCP device.

-This unit does not playback and TV screen is changed to black or green screen or the snow noise may occur on the screen.

yy If there is noise or lines on the screen, please check the HDMI cable (High Speed HDMI™ Cable).

2

Connecting

,,Tip

yy You can fully enjoy digital audio and video signals together with this HDMI connection.

yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 14.)

>>Caution

yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

yy When the HDMI connection with HDCP is not verified, TV screen is changed to black or green screen or the snow noise may occur on the screen. In this case, check the the HDMI connection, or disconnect the HDMI cable.