
Operating 25
Starting play from selected time
ry
To start playing at any chosen time on the file or title.
1.Press mINFO/DISPLAY during playback.
2.Press WSto select the time clock icon and
3.Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons.
4.Press bENTER to confirm. Playback starts from the selected time.
Resume playback
ryut
The unit records the point where you pressed the ZSTOP depending on the disc.
If “MZ(Resume Stop)” appears on the screen briefly, press dPLAY, MONO/STEREO to resume playback (from the scene point).
If you press ZSTOP twice or unload the disc,
“Z”(Complete Stop) appears on the screen. The unit will clear the stopped point.
,,Note
Changing subtitle code page
y
If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly.
1.During playback, press mINFO/DISPLAY to display the
2.Use WSto select the [Code Page] option.
3.Use ADto select desired code option.
4.Press xBACK to exit the
4
Operating
The resume point may be cleared when a button is pressed (for example; 1(POWER), R(Open/Close) , etc).