Connecting 13
Positioning the system
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening
position (
).
B
| C |
A | G |
| |
| F |
A A
A
A E
DA
Front left speaker (L)/ 
Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.
Center speaker: Place the center speaker above or below the monitor or screen.
Surround left speaker (L)/ 
Surround right speaker (R):
Place these speakers behind your listening position, facing slightly inwards.
Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections.
Unit
Connections to Your
TV
Make one of the following connections, depending
on the capabilities of your existing equipment. ,,Note
yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.
yy Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.
>>Caution
yy Make sure the unit is connected directly to the TV. Tune the TV to the correct video input channel.
yy Do not connect your player via your VCR. The image could be distorted by the copy protection system.
Component Video Connection
Connect the COMPONENT VIDEO OUTPUT jacks on the unit to the corresponding input jacks on the TV by using component cables.
You can hear the sound through the system’s speakers.
2
Connecting
