Connecting 17
USB Connection | Antenna Connection |
Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit.
Connect the supplied FM antenna for listening to the radio.
Connect the FM Wire antenna to the FM antenna connector.
Removing the USB Device from the unit
1.Choose a different function mode or press ZSTOP twice in a row.
2.Remove the USB device from the unit.
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive : Devices that support USB2.0 or USB1.1.
yy The USB function of this unit does not support some USB devices.
USB device requirement
yy Devices which require additional program installation connected to a computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the USB device is not recognized.
yy Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.)
yy This unit is not supported when the total number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or hard type usb devices are not supported.
yy USB port of the unit cannot be connected to PC. The unit can not be used as a storage device.
2
Connecting
,,Note
yy Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal as possible.
