LG Electronics OPERATING YOUR DRYER, Beeper, Time Dry, Temp Control, CUSTOM PROGRAM, Temp, High, High, Medium, AIR DRY, Air Dry, Dry Level, (Minutes), SPEED DRY, (Minutes)

	Part 9		OPERATING YOUR DRYER
	3	Dry Level
						5	Time Dry
			• Use this button to set dry level			Use Time Dry Option to change
			• First, select sensor dry cycle.			Drying Time on your own.
			• Select dry level to adjust how			You can select the desired operation
						time manually by pressing Time Dry
			much you want to dry the
						button which ranges from 20 to 60
			load. As the cycle runs, the
						minutes.
			control senses the dryness of
			the load and adjusts the time
			automatically based on the
			selected dryness level.
						Manual Preset Cycle Settings
	Note
						Manual Dry			Default Time*
	DRY LEVEL selections can only be made while							Temp.
						Cycles Load Type			(Minutes)
	using Sensor Dry Cycles. Selecting
	MORE Dry or LESS Dry automatically adjusts the
						SPEED DRY		High	25
	needed time which is already sensed.
						SMALL LOADS
						FRESHEN UP		Medium	20
						Remove Wrinkles		High
	4	Temp Control
						AIR DRY		Air Dry	30
	Use Time Control Option to
	select temperatures for the
						6	Beeper
	Manual Cycles. Press TEMP.
	CONTROL until the desired					The BEEPER controls the
	temperature setting glows.
						volume of the beep that is made
	Temperature modifiers cannot
						when you press any of the
	be used with the Sensor Dry
						buttons on the control panel and
	Cycles.
						the termination of any cycle is
						indicated.
						Press BEEPER to adjust the
	Type of Load			Default Time*		sound level or turn off the signal.
				(Minutes)
	Foam rubber-pillows,				20 - 30	7	CUSTOM PROGRAM
	padded bras, stuffed toys					Custom Programming Set up your
	Plastic-Shower curtains,				20 - 30	favorite combination
	tableclothes					of settings and save them here for one-
						touch recall.
	Rubber-backed rugs				40 - 50
						1. Select a cycle
	Olefin, polypropylene,				10 - 20	2. Change DRY LEVEL and TEMP. CONTROL.
						3. Select OPTIONS you want.
	shear nylon
						4. Press and hold the CUSTOM PROGRAM.
						To recall your stored CUSTOM PROGRAM
						Press CUSTOM PROGRAM button, then press
						START/PAUSE.
2 4