Part 9 OPERATING YOUR DRYER

❁Starting your dryer

1. Before use

•Clean lint screen before or after each cycle.

•Place laundry into dryer and shut door. See Loading.

•Turn the knob to select the drying cycle you want. The preset setting for Sensor Dry Cycles or Manual Cycles will glow. The estimated or actual cycle time (in minutes) will show in the display.

2. Loading

•Determine load size by the amount of space the load requires rather than the weight of the load.

•Avoid overloading the dryer.

Following these instruction can help reduce your utility bill, prolong the life of your clothes, and decrease the likelihood of uneven drying and wrinkle.

Following are sample loads for Super Capacity Dryers:
Heavy Work Clothes

2 sweatpants

4 jeans

4 workpants

2 sweatshirts

4 work shirts

 

 

 

Cotton/Towels

14 wash cloths

10 bath towels

10 hand towels

 

 

 

Mixed Load

9 T-shirts

3 sheets (1 king, 2 twin)

4 pillowcases

9 shorts

3 shirts

10 handkerchiefs

3blouses

3.To use a sensor dry cycle

•Select DRY LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.

•Select the desired Options.

•Press START/PAUSE

Note

DRY LEVEL selections can only be made while using Sensor Dry Cycles. Selecting MORE Dry or LESS Dry automatically adjusts the sensed time needed.

4. To use a sensor dry cycle

•Select a Manual Dry Cycle.

•Press MORE TIME or LESS TIME until the desired drying time is displayed. Tap MORE TIME or LESS TIME and the time will change by 1 minute interval.

Note

The MORE TIME or LESS TIME feature can be used with Manual Dry, Time Dry and Rack Dry Cycles.

•Press TEMP. CONTROL until the desired temperature indicator glows.

•(OPTIONAL STEP) If desired, select OPTIONS.

For more details, see Options.

•Press START/PAUSE. Be sure the door is closed.

•If you do not press START/PAUSE within 10 minutes of selecting the cycle, the dryer automatically shuts off.

•If you wish to end your drying cycle after pressing START/PAUSE, press START/PAUSE again.

To stop your dryer at any time

Press START/PAUSE or open the door.

5.Pausing or restarting To pause the dryer at any time

Open the door or press START/PAUSE once.

To restart the dryer

Close the door. Press START/PAUSE.

Note

Drying will continue from where the cycle

was interrupted if you close the door and press START within 10 minutes. If the cycle is interrupted for more than 10 minutes, the dryer will shut off. Select new cycle settings before restarting the dryer.

!WARNING!

Improper wire connection or related wiring error will can cause fire or electric shock or death.

2 6