Owner’s Manual 57
Operation
On-screen Menus Language SelectionOn-screen Menus Language Selection
T
Turning the TV Onurning the TV On
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the power, TV/VIDEO, CH (D/ E)button on the TV or press
the POWER, TV/VIDEO, COMP/RGB/HDMI, CH (+, -), Number (0 ~ 9) button on the TV .
-The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D/ Ebutton to select the OPTION menu.
2. Press the Gbutton and then use D/ Ebutton to select Language.
3. Press the Gbutton and then use D/ Ebutton to select your desired language.
From this point on, the on-screen menus will be shown in the selected language.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Notes:
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
• After turning on the TV, it takes time to be initialized for the TV Guide On Screen System.
SETUP
VIDEO
AUDIO
TIME
OPTION
LOCK
Previous
Aspect Ratio
Cinema
Caption
Caption/Text
Caption Option
Language G
Demo
ISM Method
Low Power
English
Español
Français
MENU
CABLE
2. Select the viewing source by using TV/VIDEO, COMP/RGB/DVI button on the remote control.
This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to
standby mode.