External Control Device Setup
19. Color Temperature (Command2:u)
G To adjust color temperature.
You can also adjust color temperature in the Video menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Warm 1: Medium 2: Cool
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20. PIP Input Select (Command2:y)
GTo select input source for sub picture in PIP/Twin pic- ture mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: DTV
1:Analog
2:Video 1
3:Video 2
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
21. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
1:Orbiter
2:Inversion
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
22. White Wash (Command2:q)
G To control the white wash function on/off.
You can also adjust white wash in Option menu.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: White Wash off 1: White Wash on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 64
•Refer to ‘Real data mapping’. See page 37.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
24. Orbiter Pixel Setting (Command2:s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: A
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
25. Channel Tuning (Command: m a)
G To tune channel to following physical/major/minor number Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 0: Physical channel number (Transmit by Hexadecimal code)
*NTSC air: 02 ~ 45
NTSC cable: 01, 0E ~ 7D
ATSC air: 01 ~ 45
ATSC cable: 01 ~ 87
1:Major channel number (Transmit by Hexadecimal code)
*NTSC air: 02 ~ 45, NTSC cable: 01 ~ 7D
ATSC air: 01 ~ 63, ATSC cable: 01 ~ 87
2:Minor channel number (Transmit by Hexadecimal code)
*NTSC air: 00 (must be 0), ATSC: 01 ~ FE
3:High nibble → Main picture: 0, Sub picture (PIP): 1
Low nibble → NTSC air: 0, NTSC cable: 1, ATSC: 2,
Example) If you want PIP channel tuned to ATSC cable (stan- dard)
•Refer to ‘Real data mapping’. See page 37.
*To change the channel between ATSC air and ATSC cable, change the antenna setting with EZ Scan.
Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][x] [a][ ][Set ID][ ][NG][Data0][x]
26. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x] [b][ ][Set ID][ ][NG][Data][x]
27. Key (Command: m c)
G To send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 40.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
*It’s impossible to command the IR Code 0x08 and 0xC4 with
Owner’s Manual 39
