34 Plasma TV
Operation
Moving the PIP
Moving the PIP sub picture
sub picture
In PIPmode, press the D/E/F/Gbutton to move the sub picture to a different location on the
screen.
Adjusting Main and Sub Picture Sizes for
Adjusting Main and Sub Picture Sizes for T
Twin Picture
win Picture
Use the D/E/F/Gbutton to change main and sub picture sizes in Twin Picture mode.
If the maximal adjusted
screen is 4:3, the large
screen is filled with entire
screen vertically as shown.
If the maximal adjusted
screen is 16:9, the large
screen appears the gray
part at both the up and
down sides.
i.e)
1. Press the PIP button to activate the POP mode while in PIP mode.
•Channel selection:Use Fbutton to enlarge the selected channel being searched on the PIP
screen to shift it for viewing on the Main screen.
•PIPselection: Use D/Ebutton to select one of 3 PIP screen pictures in POP mode.
•Input source selection for PIP:Use PIP INPUT button or Sub Input option on the SETUP
menu to select an input source for the sub picture (You can’t select DTV for main and sub pic-
ture simultaneously). You can only select the Analog and DTV signal for sub input source in
POPmode.
2. Press the EXIT button to cancel POP mode.
POP
POP (Picture-out-of-Picture: Channel Scan)
(Picture-out-of-Picture: Channel Scan)
- Use POPto search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POPscreen.
- Note: Run EZ Scan channel search before using POPmode.
FTV 2-0
TV 4-0
TV 6-0
E
D