INTRODUCTION PAGE 7

Identification of ControlsRear Panel
TO TV
EXTERNAL
INPUT
PALNTSCAUTO
AUDIO
OUT
VIDEO
OUT
L
R
5.1CH AUDIO OUT
DIGITAL
OUT
FRONT REAR
L
R
CENTER WOOFER
DIGITAL
OUT
S-VIDEO
OUT
OPTICAL
COAXIAL
S-VIDEO OUT jack
AUDIO OUT (L/R) jacks
5.1CH AUDIO OUT jacks
VIDEO OUT jack
POWER CORD
Connect to an AC 100-240V,
50/60Hz outlet only.
COAXIAL DIGITAL AUDIO OUT jack
EXTERNAL INPUT (SCART) jack
TO TV (SCART) jack
OPTICAL DIGITAL AUDIO OUT jack
Remove the dust protection cap from
the connector and connect the optical
digital cable (not supplied) firmly so
that the configurations of both the
cable and the connector match. Keep
the dust protection cap and always
reattach the cap when not using the
connector to protect against dust.

Dust protection cap

TV SYSTEM SELECT Switch
Refer to explanation below.
TV System Select
You can enjoy NTSC or PALdiscs by using your TV SYSTEM SELECT switch to choose the appropriate system.
If you try to play back PALdisc with NTSC-TV. The player will not playback the disc.
When the selected TV SYSTEM SELECTswitch does not coincide with the system of your TV, normal color
picture may not be displayed.
Select the TV SYSTEM SELECTswitch when the power is turned off.
When you playback NTSC disc with PAL-TV, some discs may produce black bands at the top and
bottom of the screen.
Position of TV SYSTEM SELECT switch Connected TV Available disc
PAL PAL NTSC/PALDVD disc
NTSC NTSC NTSC DVD disc
AUTO MULTI system TV NTSC/PALDVD disc