Initial Settings (continued)
Password (Security Code)
You can create or change password.
1.Select Password on the LOCK menu then press B. The “Change” is highlighted
2.Press ENTER then the password window will appear.
3.To make a new password:
When the “New Password” section is highlighted, enter a
To change the password:
When the “Old Password” section is highlighted, enter the
4.Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the following steps:
1.Remove any disc from the unit and close the disc tray. See that “nodISC” is displayed on the display window.
2.Press SETUP and setup menu apears on the TV screen.
Use the numbered buttons to enter the
3.Enter a new password as described above.
Area Code DVD
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.
1.Select “Area Code” on the LOCK menu then press B.
2.Select the first character using v / V buttons.
3.Shift the cursor using B button and select the second character using v / V buttons then press ENTER, the password window will appear
4.Press ENTER, the password window will appear.
5.If you have not entered password yet:
When the “New Password” section is highlighted, enter a
If you have entered password already:
Enter a
6.Press ENTER to confirm your Area Code selection, then press SETUP to exit the menu.
Initial Settings
21
