LG Electronics E1960S, E1960T, E2060S, E2060T, E2260S, E2260T, E2260V, E2360S, E2360T, E2360V Connecting with the PC

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts

the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen

flicker or tilted screen while using the device or after changing screen resolution, press the

AUTO function button to improve resolution.

Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connect signal input cable and power cord in order, then tighten the screw

of the signal cable.

Connecting with the PC

3. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Connecting the Display E1960S/E2060S/E2260S/E2360S

Mac adapter :For Apple Macintosh use,

a separate plug adapter is needed to

change the 15 pin high density (3 row) D-

sub VGA connector on the supplied cable

to a 15 pin 2 row connector.

When using a D-Sub signal input cable

connector for Macintosh

Wall-outlet type

Varies according to model.

Power Button

Connect the signal

input cable and

tighten it up by

turning in the

direction of the

arrow as shown in

the figure.

LG Electronics Connecting with the PC