18 Section 2A: Your Phone – The Basics
Turning Your Phone On and Off

Turning Your Phone On

To turn your phone on:
Press and hold for approximately two seconds.
Once your phone is on, itmay display “Searching for Service,”
which indicates thatyour phone is searching for a signal.
When your phone finds a signal, itautomatically enters
standby mode – the phone’s idle state. Atthis point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically withoutyour intervention. You can also initiate a
search for SprintPCS Service by pressing any key (when your
phone is turned on).
Tip: The Power Save feature helps to conserve your battery power when you
are in an area where there is no signal.

Turning Your Phone Off

To turn your phone off:
Press and hold for two seconds until you see the
powering-down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).