LG Electronics GCC-4480B To Install as a Slave Drive, the Power Connector

DirectCDTM v2.5b(s) Installation
9
To Install as a
Slave Drive
Connecting
the Power
Connector
To install the drive as a Slave, change the jumper setting on the rear
panel to SL.
DIGITALANALOG
INTERFACE POWER
DRCSM
SLA
GLG3
9
1
+5+12
GND
40
2
AUDIOAUDIO
Master drive
(Booting hard disk)
Slave drive
(CD-RW/DVD-ROM
drive)
(Jumper set to
SLave)
DIGITALANALOG
INTERFACE POWER
DRCSM
SLA
GL
G39
1
+5+12
GND
40
2
AUDIOAUDIO
DIGITALANALOG
INTERFACE POWER
DRCSM
SLA
GL
G39
1
+5+12
GND
40
2
AUDIOAUDIO
Master drive
(Booting hard disk)
Primary connector
Slave drive
(CD-RW/DVD-ROM
drive)
(Jumper set to
SLave)
Secondary
connector
Master drive
(Other IDE drive)
- OR -
Connect the power cable from the computer’s power supply to the socket
on the drive unit, fitting the connector firmly into the power in connector.
If there is no spare power cable available in the computer, you will have
to purchase a splitter cable of a suitable type.
DIGITAL
AUDIO
ANALOG
AUDIO INTERFACE POWER
D G
39
401+5GND+12
2
C S M
S L A
R G L
+5 GND +12
POWER
Beveled edge up
NOTE : Improper connection may damage the drive and void the
warranty.Generally, the power connector can only fit one way.