LG Electronics GCC-4480B Location and Function of Controls

DirectCDTM v2.5b(s) Introduction

Front Panel

Rear Panel

Location and Function of Controls

DIGITAL

AUDIO

ANALOG

AUDIO INTERFACEPOWER

D G

401+5GND+12

C S M

S L A

R G L

1 2 3 4 5

1. Digital Audio Output Connector

2. Analog Audio Output Connector

3. Jumper Connector

This jumper determines whether the drive is configured as a master or slave.

Changing the master-slave configuration takes effect after power-on reset.

4. IDE Interface Connector

Connect to the IDE (Integrated Device Electronics) Interface using a 40-pin

flat IDE cable.

NOTE :Do not connect or disconnect the cable when the power is on, as this

could cause a short circuit and damage the system. Always turn the power

OFF when connecting or disconnecting the cable.

5. Power Connector

1.Headphone Jack

2.Volume Control

3.Emergency Eject Hole

4.Stop/Eject Button

5.Disc Tray

6.Drive activity indicator (Read/Write)

12 43

Contents

Main i English FCC COMPLIANCE STATEMENT ii CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT Contents DirectCDTM v2.5b(s) Introduction Thank you for purchasing this CD-RW/DVD- ROM Drive. Package Items Features Precautions Operation Important Precautions Software Install the supplied CD Recording Software before using this unit. System Environment This unit can be operated in the system environment explained here. Front Panel Rear Panel Location and Function of Controls Before Removing the Cover Mounting the Drive Installing the Drive Jumper Setup PC Connection To Install as a Master Drive To Install as a Slave Drive the Power Connector the Interface Connector the Sound Card Cover Replacing the For Windows 95/98/2000/ME/ XP Users Device Drivers DirectCDTM v2.5b(s) Operation Emergency Eject How to Use the Discs DirectCDTM v2.5b(s) Appendix Before Requesting Service Troubleshooting Specifications P/NO.3828HM1038A Caution!