CLEANING
It is important that your refrigerator is kept clean to avoid unwanted odors. Spilled food must be cleaned immediately because it could stain the plastic surfaces.
Never use metal fibres, brushes, abrasive cleaners or alkaline solutions over any kind of surface.
Before cleaning, remember that wet objects can stick to extremelly cold surfaces. Do not touch frozen surfaces with bare, wet hands .
EXTERIOR - Use warm water and a mild detergent solution to clean the surfaces of your refrigerator. Clean it with a damp cloth and dry it.
INTERIOR - A regular cleaning of the interior is
recommended. Use a damp cloth in a solution of one (1) teaspoon sodium bicarbonate (baking soda) dissolved in one (1) quart of warm water.
Rinse the surfaces with a damp cloth and dry.
INTERIOR PARTS - Wash the shelves, door baskets, storage trays, magnetic door with a damp cloth in a solution of one (1) teaspoon sodium bicarbonate (baking soda)
dissolved in one (1) quart of warm water. Rinse the surfaces with a damp cloth and dry.
WARNING
Always unplug the power cord from the power outlet before cleaning in the vicinity of electrical parts (lamps, switches, controls, etc.) Wipe out excess moisture with a sponge or cloth to prevent water or liquids to contacting an electric part and cause a short circuit. Do not use flammable or toxic liquid cleaners.
GENERAL INFORMATION
ON VACATIONS | IF YOU MOVE |
During average length vacations, probably prefer to leave the refrigerator running.
Some foods may be frozen for extended storage.
If you plan to be away for an extended period, remove remove the food, disconnect the power cord, clean the interior (as described above,) and block the door open to prevent odors.
Remove or fix all loose articles inside the refrigerator.
To avoid damaging the leveling screws, turn them until they reach the base.
POWER FAILURE
Most power failures are fixed within one or two hours and won’t affect your refrigerator’s temperatures. However, you should minimize the door openings while the power is out.
During long term power breakdowns place an EPS bar over your stored food, this will help to keep them fresh for longer time.
ANTI-CONDENSATION PIPE
The outside of the refrigerator may become hot, especially immediately after installation and
It is caused by the anti-
condensation pipe which pumps hot refrigerant to prevent condensation on the outer cabinet.
Pipe
10
