THIS REFRIGERATOR IS MANUFACTURED WITH EXTREME CAUTION USING THE LATEST TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE COMPLETELY SATISFIED WITH IT’S PERFORMANCE AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS MANUAL COMPLETELY. IT INCLUDES THE EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE ALONG WITH SOME USEFUL TIPS.
INSTALLATION
1.Install in an appropriate location.
Place the refrigerator where it is easily accessible.
2.Avoid placing your refrigerator near heat sources, direct sunshine, or areas of high humidity.
3.There must be an appropriate air flow
around your refrigerator in order to get a good performance. If your refrigerator is placed close to the walls, it must have a clearance of 10" on top and 2" on both sides.
The refrigerator must have a 1” clearance from the floor, specially if it’s carpeted.
4.To avoid problems, the refrigerator should be properly leveled. If necessary, adjust the leveling screws.
The front must be slightly higher than the back so the doors will close properly.
The leveling screws are easier to turn if you lean the refrigerator slightly backwards. Turn the leveling screws clockwise to raise the front of the refrigerator and counterclockwise to lower it.
5.Install the refrigerator in a place where the temperature is between 50° F (10°C) and 104° F (40°C). If the temperature is higher or lower, the cooling performance of the appliance can be diminished.
NEXT
1.Clean your refrigerator and remove dust accumulated during transportation.
2.Install all accessories, such as ice trays, in the correct places.
They are packed together to prevent damage in transit.
3.Follow the instructions for handle assembly.
4.After moving the refrigerator, wait an hour before plugging it in to allow the oil to settle in the compressor.
5.Connect the power cord to the power outlet. Do not connect more than one appliance to the same outlet.
If your refrigerator's power cord has 3 terminals, DO NOT remove the ground terminal. Grounding minimizes the risk of electric shock. This connector requires a
5.Before using your refrigerator, let it run for 2 or 3
hours.
Verify the cold air flow at the freezer to ensure proper cooling. Now your refrigerator is ready to use.
3
