OPERATION
START UP
When your refrigerator is installed or relocated, let it stand for an hour before starting it. Then let it run for 2 or 3 hours to stabilize the internal temperature before filling it with food. If power is interrupted, allow 5 minutes to pass before restarting.
BEFORE CONFIGURING THE TEMPERATURE
iThis refrigerator has a temperature control button for the refrigerator compartment and a selector for the freezer compartment.
i· The basic configuration for the refrigerator's temperature control is in the middle; that is, the first three LEDs are turned on.
iThe basic configuration of the temperature selector at the freezer compartment is “4”.
REFRIGERATOR COMPARTMENT CONTROL
iYou can adjust the refrigerator compartment's temperature using the Ref. Temp Control button. Each time you press the button, one LED should illuminate until it reaches Max. Continuing to press this button will continue to cycle through all settings from Min to Max and around again.
iThe refrigerator compartment's temperature is indicated by the number of LEDs illuminated, from Min to Max. Min is warmer and Max is cooler.
iYou can select the desired temperature with this control.
iTo conserve energy, set the control to Min. (first LED on)
FREEZER COMPARTMENT CONTROL*
iCOLD AIR CONTROL - 1, 2, 3, 4, 5, 6, 7, 8, and 9
By placing the selector on 9, the freezer will be colder but the food stored in the refrigerator compartment will cool more slowly because of the diminishing air flow.
iIn cold weather, the compressor's running time is reduced and the freezer compartment tends to be a little warmer.
To keep the freezer colder, set the TEMP CONTROL between 6 and 9.
i· If there is much food stored in the freezer or the door is opened frequently, its temperature will be a little bit warmer.
In this case, set the TEMP. CONTROL between 6 and 9 to make it colder.
Set the TEMP. CONTROL to its original position to reduce the energy consumption.
iIn hot weather, or when much food is stored in the refrigerator, it tends to be a little bit warmer. iTo make it cooler, turn the TEMP. CONTROL between 2 and 4 to direct more air to the refrigerator and place the REF. TEMP. CONTROL at the MAX position. If the TEMP. CONTROL is sebetween 6 and 9
at the freezer compartment, the refrigerator will cool very slowly.
5
