Mounting on a table | LG Electronics IPS235P, IPS225P specification

ASSEMBLING AND PREPARING 7

Mounting on a table	NOTE
1 Lift and tilt the Monitor set into its upright	Tilt from +15 to -5 degrees up or down to adjust
position on a table.	the angle of the Monitor set to suit your view.
Leave a 10 cm (minimum) space from the wall	- 5	15
for proper ventilation.
10 cm
10 cm
10 cm	Front	Rear
10 cm	Front	Rear

• Swivel Range : -45°~45°(+/- 2°)

ENGLISH

2Connect the Power Cord to a wall outlet.

-45° ~ 45°(+/- 2°)

•Height Range : maximum 5.12 inch (130.0 mm)

130.0 mm

3Press (Power) button on the bottom switch panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

*Please be sure to remove the Locking pin to adjust the height.

Image 7

Contents

LCD Monitor Contents Card SUB Cable Stand Base Power Cord DVI-D CableAssembling and Preparing Unpacking Parts and buttons Power Button Button See p.13 Connection panel See p.11 Unlocked OSD Locked Stand Base Setting up the Monitor setAttaching the Stand Base Detaching the Stand Base Mounting on a table Ergonomic Using the Pivot function IPS225P/IPS235P Mounting on a wall SUB connection Using the Monitor SETConnecting to a PC DVI-D connection Yy‘AUTO’ Function YySelf Image Setting Function Exit Customizing SettingsAccessing The Main Menus Monitor set Buttons Menu Settings Customizing Settings Sharpness Picture Blue Color Temp PresetUser Green Clock Monitor Setup OSD menuPhase Vertical White PowerIndicator Reset Photo Mode SettingMovie Text Dual WEB Dual Package SettingAvailable picture settings are described below Dual Monitor OFF Check the following before calling for service Troubleshooting 1080P Settings Specifications IPS235P ‌SPECIFICATIONS Indicator Preset Modes ResolutionPage Model Serial