ENGLISH
18CUSTOMIZING SETTINGS
OTHERS
1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu.
2 Press the MENU button to display the options in the OSD menu.
3 Select OTHERS by pressing the buttons on the bottom of the Monitor set and set the options.
4 Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the up arrow ( 
) button.
The available picture settings are described below.
Menu |
| Description | |
LANGUAGE | To choose the language in which the control names are displayed. | ||
POWER | Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you | ||
INDICATOR | set OFF, it will go off. | ||
| If you set ON at any time, the power indicator will automatically be turned on. | ||
WHITE | If the output of the video card is different the required specifications,the color level may deteriorate | ||
BALANCE | due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard | ||
| output level of the video card in order to provide the optimal image.Activate this function when | ||
| white and black colors are present in the screen. | ||
ORIGINAL RATIO | WIDE |
| |
| Switch to full screen mode according to input image signal. | ||
| ORIGINAL |
| |
|
|
| |
| Change the input image signal ratio to original. | ||
| * This function works only if input resolution is lower than Monitor set ratio (16:9). | ||
SUPER ENERGY | Sets the SUPER ENERGY SAVING function. | ||
SAVING |
|
| |
ON | Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function | ||
| |||
| OFF | Disables SUPER ENERGY SAVING. | |
| RESET | Resets the values of total energy consumption reduction and CO2 emission reduction | |
|
| estimates. | |
RTC (Response | If you enable RTC function, you can control Response Time Compensation level. | ||
Time Compensation) | If you set OFF,you disenable the Response Time Compensation function. | ||
FACTORY | Restore all factory default settings except"LANGUAGE." Press the ◄, ► buttons to reset | ||
RESET | immediately. | ||
NOTE
yyTOTAL POWER REDUCTION: How much power is saved while using the monitor.
yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yySAVING DATA(W/h)
| 545 mm (21.5 inch) | 584 mm (23 inch) |
|
|
|
SUPER SAVING | 4 W/h | 5 W/h |
|
|
|
LED SAVING | 15 W/h | 12 W/h |
|
|
|
yySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.
yyLG calculated these values by using “broadcast video signal”.
yyLED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. yySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
