Fostex PD606 MENU/LINK Master dial / ENTER/YES key, Access indicator HDD, DVD, Locate key

Chapter 3: Names and Functions

LINK MASTER

ENTER/YES

MENU

8.[MENU]/[LINK MASTER] dial / [ENTER/YES] key

You can rotate or press this knob. This knob has three main functions.

• [MENU] dial function:

In the MENU or editing mode, rotating this knob selects an item, option, alphanumeric character, etc.

• [LINK MASTER] dial function:

Rotating this knob controls the master gain of linked channels.

• [ENTER/YES] key function.

When unSHIFTed, pressing this knob confirms the setting or executes a function. When SHIFTed, pressing this knob brings up the main menu screen.

<Note>: In this manual, we describe this knob as the [MENU] dial, [LINK MASTER] dial or [ENTER/YES] key, depending on the func- tion used.

ACCESS

HDD DVD

9.[ACCESS] indicator (HDD, DVD)

Each indicator Indicates the access condition of the internal hard disk drive or the DVD-RAM drive.

Each indicator lights in green while the corresponding drive is not accessed, in orange while it is accessed for reading, and in red while it is accessed for writing.

*When no disk is set to the DVD-RAM drive, the "DVD" indicator is unlit.

space	ABC	DEF	10.	Alphanumeric keys
1	2	3		While the display shows the Home screen, pressing any of the
				alphanumeric keys enters the time data edit mode. After editing time
GHI	JKL	MNO
				data, you can locate to the edited time position by pressing the [LOCATE]
4	5	6		key (see page 103). While the unit is in any of the edit modes, you can
PQRS	TUV	WXYZ	symbol
				enter time data or name.
7	8	9	0

LOCATE

CLEAR

<Key example>: Using the "3" key, you can enter "d", "e", "f", "D", "E" and "F", as well as "3".

11.[LOCATE] key

Locates to the desired position in the following manners.

•While a cue point is selected, pressing the key locates to the selected cue point (see page 104).

•While time data is being edited, pressing the key locates to the edited time position (see page 103).

•While the display shows the Home screen, pressing the key locates to the point previously located to (the default setting is "ABS 0")(see page 102).

12.[CLEAR] key

Pressing this key functions in the following manners.

•While entering characters:

Erases the next character on the right of the cursor position.

• While editing time data:

Clears time data and sets it to “00h 00m 00f 00sf”.

•While the "Peak hold" setting menu in the Setup mode is set to "∞":

Resets the peak level indication on the level meters.

•While a warning popup window is shown:

Dismisses the popup window.

Location Recorder Model PD606 47