Fostex PD606 owner manual Time code output source selection Sel. TC Out, 189, Repro, Gen

Chapter 8: MENU mode/TC SETUP menu

Time code output source selection [Sel. TC Out]

Using the "Sel. TC Out" menu item, you can set the time code source (Repro or Gen) fed from the [TIME CODE OUT] connector.

1)When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the [TIME/TC SET] key.

The display now shows the TC SETUP menu screen.

2)Use the [MENU] dial to select the “Sel. TC Out” menu item, and press the [ENTER/YES] key.

The current setting starts flashing and you can now select the desired option.

Flashing

3)Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm your setting.

Options

You can select from among “Repro” and “Gen” (the default is “Repro”).

Repro

Outputs playback time code.

Gen

Outputs the internal generator time code.

<Note>: Even if "Sel. TC Out" is set to "Gen", the generator time code is not output when the generator mode is set to the "EXT RUN" mode.

4)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD606 189