Fostex PD606 owner manual 151, End pop tone setting

Chapter 8: MENU mode/SYS SETUP menu

Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm your setting.

		Options
	Selectable between “Off”, “TONE” and “4POP TONE” (the default is “Off”).
Off		No slate or pop tone is recorded.
TONE		The slate tone at 1kHz is recorded for the duration set by “Tone rec time”.
4 POP TONE		The pop tone at 1kHz is recorded. The cycle of 0.5 sec tone and 0.5 sec mute recording
		is made four times repeatedly.

• End pop tone setting

Use the [MENU] dial to select the “End pop tone” and press the [ENTER/YES] key. The current setting starts flashing.

Flashing

Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm your setting.

	Options
	Selectable between “On” and “Off” (the default is “Off”).
On	The 1kHz pop tone is recorded at the end of recording.
Off	The 1kHz pop tone is not recorded at the end of recording.

4)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD606 151