Fostex PD606 owner manual 200, Editing descriptor information, Adding descriptor information

Chapter 8: MENU mode/DISK UTILITY menu

Editing descriptor information:

1)Use the [MENU] dial to select a desired descriptor information item and press the [ENTER/YES] key.

The first character of the selected descriptor information item flashes and you can now edit the item.

Flashing

2)Use the [] / [] key to move the cursor position to the right of "=" and make editing.

3)Use the [MENU] dial (or the alphanumeric keys) to enter characters.

While the cursor is on the first character of the descriptor information, press- ing the [CLEAR] key repeatedly clears all the information.

4)After editing the information item, press the [ENTER/YES] key to confirm your setting.

5)To edit another descriptor information item, carry out the same procedure as above repeatedly.

Adding descriptor information:

You can add a new descriptor information item to the current information.

1)Select "<New line>" at the bottom and press the [ENTER/YES] key.

You are now ready for entering a new item.

Carry out the same procedure as above for entering a new item.

<Note>: When adding a new descriptor information item, always enter the "meta data header ID", followed by data.

2)After entering new information, press the [ENTER/YES] key to confirm your setting.

Deleting descriptor information:

Unused descriptor information can be deleted.

1)Select a line you want to delete, and press the [ENTER/YES] key.

You can now edit the line, as described above.

2)Press the [CLEAR] key repeatedly to clear the whole information, and press the [ENTER/YES] key.

The line is deleted, while the subsequent lines move up.

200 Location Recorder Model PD606