Fostex PD606 owner manual How to set the desired reel number

Chapter 2: Preparation before using the PD606

<Note>: In rare cases, the unit shows "Disk error!" and releases the disk lock after formatting is performed. In such a case, set "Physical Format" to "On" and format the disk again. If "Disk error!" is shown again after the physical format is per- formed, do not use the disk.

8)After formatting, press the [EXIT] key to exit the MENU mode.

The display returns to the Home screen previously shown before entering the MENU mode.

To make recording to the DVD-RAM disk, select the current drive to the DVD drive (see page 86 for details).

<Note>: If you format a DVD-RAM disk when any partition is selected as the cur- rent drive, the current drive does not change after formatting is completed. There- fore, if you want to make recording to the DVD-RAM disk, you must change the current drive from the partition to the DVD drive.

On the other hand, if you format a partition when the DVD drive is selected as the current drive, the current drive automatically changes to the partition after for- matting is completed.

How to set the desired reel number

During the process of initial formatting, you can set the desired reel number by the following procedure.

1)While "Reel No: [S001" is highlighted, press the [ENTER/YES] key.

The first digit of the reel number field starts flashing. You are ready for editing the reel number.

flashing

2)Use the [MENU] dial (or the alphanumeric keys) to enter the desired reel number.

Use the [] and [] keys to move the cursor position when entering the number using the [MENU] dial.

When using the alphanumeric keys for entering characters, pressing any other alphanumeric key moves the cursor to the right automatically.

Pressing the [CLEAR] key clears the character at the cursor position.

3)After editing the reel number, press the [ENTER/YES] key to confirm your setting.

36 Location Recorder Model PD606