Chapter 3: Names and Functions

5.[ST BUS OUT] connector (XLR-5-32 type/balanced)

Outputs the stereo bus L/R signals. It is used to connect to an external audio device. The reference level is set to +4dBu by default but you can change it to -10dBu or -60dBu using the "Stereo out level" menu item in the "SYS SETUP" menu of the MENU mode (see page 161).

 

 

 

1

GND

1

 

5

2

L HOT

 

3

L COLD

 

 

 

2

4

 

4

R HOT

 

5

R COLD

 

3

 

 

 

 

 

6. [USB HOST] connector (Series A Receptacle/USB 2.0 High speed) Not currently supported. Prepared for the future expansion.

1 2 3 4

1VBUS

2D -

3D +

4GND

<Note>: When you connect the PD606 to a personal computer using the [USB PC] connector, do not connect any device to the [USB HOST] connec- tor.

7.[USB KYBD] connector (Series A Receptacle/USB 1.1)

Used to connect to a USB keyboard. You can control the PD606 from the keyboard (see “Connection examples of a keyboard” on page 66).

1 2 3 4

1VBUS

2D -

3D +

4GND

8.[USB PC] connector (Series B Receptacle)

Used to connect to a personal computer. You can transfer audio files between the PD606 and your personal computer (see pages 68 and 118).

<Note>: When you connect the PD606 to a personal computer using the [USB PC] connector, do not connect any device to the [USB HOST] connec- tor.

9.[DC IN 12-24V] connector (XLR-4-32 type/male)

Connects the optional AC adaptor or an external battery.

41

32

1GND

2NC

3NC

412-24V

10.[DC OUT] connectors (Hirose 4-pin, HR10A-7R-4S type/female)

Outputs DC 12 V/0.5 A power. You can supply power to an external device.

41

32

1

GND

2NC

3NC

412-24V

11.[ADJUST] lever

Used to adjust the protector on the left of the rear panel (see page 25).

Location Recorder Model PD606

41

Page 41
Image 41
Fostex PD606 ST BUS OUT connector XLR-5-32 type/balanced, USB Kybd connector Series a Receptacle/USB, Adjust lever