Fostex PD606 owner manual Adding a new cue point to the cue point list, Deleting a cue point

Chapter 5: Recording/Playback

• Deleting a cue point

To delete an unnecessary cue point, select “<Delete>” using the [MENU] dial and press the [ENTER/YES] key (“Sure?” flashes).

flashing flashing

Press the [ENTER/YES] key again to delete the cue point from the list.

The display returns to the home screen

<Note>: After deleting a cue point, the label column of the cue point becomes empty while the time value column shows “--h --m --s --f --sf”.

To exit the CUE LIST screen, press the [EXIT] key.

Adding a new cue point to the cue point list

While the CUE LIST screen is shown, you can add a new cue point to the list.

Select a desired cue number which does not hold data.

By pressing the [ENTER/YES] key, time data of the current recorder position is set as the cue point.

In the example below, Cue 05 is set when the current recorder position is “01h 58m 20s **f **sf” (LTC time).

To exit the CUE LIST screen, press the [EXIT] key.

98 Location Recorder Model PD606