Chapter 6: Advanced operations

If you select "<All Select>" at the bottom of the file list on the screen and press the [FILE SEL] key, all audio files are selected and checkmarked.

6)After making audio file selection, press the [ENTER/YES] key.

The PD606 starts file copy to the destination medium (DVD-RAM disk or partition). During file copy, the display shows estimated time and space remaining progress indication for file copy. When file copy completes, “Completed!” is shown on the display and the PD606 stops disk access.

<Note>: If the available recording space of the copy destination is smaller than the copy source size, “Over copy size!” is shown and the display returns to the previous screen for selecting an audio file.

<Note>: After file copy to a DVD-R/RW or CD-R/RW is completed, the disk is auto- matically finalized. While finalizing the disk, the popup screen as shown below ap- pears. When you copy an audio file whose size is less than 1GB to a DVD-R/RW disk, the unit must write readout area from the center of the disk to the 70mm diameter position, resulting longer finalizing time.

We recommend using a CD-R/RW disk when you make a file copy of an audio file whose size is less than 650 MB.

7)Pressing the [EXIT] key repeatedly to exit the MENU mode.

<Note>: If you set a recorded DVD-R/RW or CD-R/RW disk to the copy destination, the display shows “Write protected!” or "No Blank disk". In such a case, do the fol- lowing.

• When a recorded DVD-R or CD-R disk is set:

After briefly showing "Write protected!", the display shows the screen for selecting the drive of the copy destination. Change the disk.

• When a recorded DVD-RW or CD-RW is set:

After briefly showing "No Blank disk", the display shows the popup screen as below. If you erase the disk, press the [ENTER/YES] key. If you do not erase the disk, press the [EXIT] key. If erasing the disk is properly completed, the display automatically returns to the execution screed for disk copy.

114

Location Recorder Model PD606

Page 114
Image 114
Fostex PD606 114, After making audio file selection, press the ENTER/YES key, When a recorded DVD-R or CD-R disk is set