Fostex PD606 owner manual Pre/post fader selection Disk Feed, 169

Chapter 8: MENU mode/SYS SETUP menu

Pre/post fader selection [Disk Feed]

The "Disk Feed" menu item selects whether you record pre or post fader signals to tracks 1 through 6.

By default "pre fader" is selected, so signals are directly sent to tracks 1 through 6 without being affected by the [SEND LEVEL] controls.

1)While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the [ENTER/YES] key.

2)While “SYS SETUP” is highlighted, press the [ENTER/YES] key.

The display now shows the SYS SETUP menu screen.

3)Use the [MENU] dial to select the “Disk Feed” menu item and press the [ENTER/YES] key.

The current setting starts flashing and you can now select the desired option.

Flashing

	Options
	You can select from among “Pre” or “Post” (the default is “Pre”).
Pre	The signal unaffected by the [SEND LEVEL] control is recorded.
Post	The signal affected by the [SEND LEVEL] control is directly recorded.

When setting the "Disc Feed" item to "Post", the icon below appears on the left of the Home screen.

4)Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm your setting.

5)Press the [EXIT] key repeatedly until you exit the MENU mode.

Location Recorder Model PD606 169