Fostex PD606 owner manual SYS Setup menu

Chapter 8: MENU mode/SYS SETUP menu

SYS SETUP menu

In the SYS SETUP menu, the following menu items for settings regarding recording/playback are available. You can save setting data using the "SAVE SETUP" menu and recall the saved data whenever you want (see pages 213 and 214).

<Note>: For the “Auto copy” and “Adjust RTC” menu items in the SYS SETUP menu, see pages shown below.

Menu item	Contents
Set project name	Edits a project name recorded to an iXML file.
Default file name	Edits the default file name of an audio file created when recording.
Default TrkName	Edits the default track name of a BWF file created when recording.
Next event No	Sets the event number in the description information of an audio file.
Record FS & Bit	Selects the Fs and bit length of the audio file created when recording.
Pull up/down	Selects pull up/down setting when using the internal clock reference.
Auto copy	Selects the auto copy mode which enables simultaneous recording to a DVD-RAM
	disk when making recording to a hard disk partition (see page 106).
Rec source sel	Selects the recording sources.
Digital out	Selects the digital output audio format.
Diagnoses	Selects whether or not creating a diagnoses file which logs errors during recording, etc.
Peak hold	Sets the peak hold time of the bargraph meters.
Tone rec mode	Sets the recording time and mode of the slate tone.
Pause time	Sets the pause cancel time.
Keyboard Sel	Selects the type of a USB keyboard connected to the [USB KYBD] connector.
Pre rec time	Sets the pre recording time of audio pooled in the buffer.
Max file length	Sets the maximum recording volume of a file.
Auto part. link	Sets on/off of the auto partition link function.
False start	Selects the false start mode.
Limiter parameter	Sets the limiter parameters.
Stereo out level	Selects the output reference level of the [STEREO BUS OUT] connectors.
Monitor custom	Defines four custom settings for monitoring.
Speaker mute	Selects on/off of muting the internal speaker when the unit is not in playback mode.
Error tone	Selects whether or not the unit outputs the warning tone for four types of conditions.
Chain play	Selects how the recorder behaves after it finishes playback of an audio file.
Disk Feed	Selects whether you record pre or post fader signals to tracks 1 through 6.
Adjust RTC	Adjusts the internal realtime clock (see page 31).
Version	Shows the system version of the unit.

138 Location Recorder Model PD606