Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place the handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room. Ô
Using Room/Baby Monitor
1.Press the MENU soft key and select the Room Monitor menu. To Room Monitor appears.
2.Select the handset you want to monitor by using VOL/RING/ 
or VOL/RING/ 
.
3.Press the OK soft key.
RoomMonitor appears, and you hear sounds in the room where the handset is installed.
4.To turn off the Room Monitor, press the END soft key, or end.
Handset Setup
The following submenu options must be set separately for each handset.
Programming your Voice Mail Access Number
1.Press the MENU soft key. Select the Handset Setup menu, and then the Edit Voice Mail submenu. Edit V_mail No. appears.
2.Enter your personal access number using the number keypad
*/tone/<, #/>, the DELETE soft key, or the PAUSE soft key (up to 20 digits).
3.Press the OK soft key. You will hear the confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in Step 2 using the DELETE soft key and the OK soft key.
Ô NOTE Ô
This feature only works when the handset(s) is within the range of the base.
Setting Menu Options
17
