Direct power off function
You can disconnect the mains lead during projection or immediately after use and move the projector. The cooling fan will operate by the internal power supply to cool down the lamp.
BWhen this function is used, it may take more time for the lamp to turn back on again compared to when the lamp cools down with the mains lead connected.
BDo not put the projector in a bag while the cooling fan is operating.
CAUTION
If not using the projector for an extended period of time, disconnect the mains plug from the mains socket.
BIf dust builds up on the mains plug, the resulting humidity may damage the insulation, which could result in fire.
BThis projector continues to draw approximately 5 W of power even when the power is turned off.
Power indicator
Power indicator status | Projector status | ||
Red | Illuminated | The projector is in standby mode and image projection | |
is possible by pressing the POWER button. | |||
|
| ||
|
|
| |
|
| The projector is preparing for projection after the | |
| Flashing | power is turned on while the power indicator is | |
Green | illuminated red. (After a short period, a picture will be | ||
| |||
|
| projected.) | |
| Illuminated | A picture is being projected. | |
|
|
| |
| Illuminated | The lamp is cooling down after the power is turned | |
| off. (The cooling fan is operating.) | ||
|
| ||
|
|
| |
Orange |
| The projector is preparing for projection after the | |
| power is turned on while the power indicator is | ||
| Flashing | ||
| illuminated orange. (After a short period, a picture | ||
|
| ||
|
| will be projected.) | |
Basic Operation
