10-ENGLISH
Before use

Caution when moving the projector

Be sure to attach the lens cover before moving the projector.
The projection lens is extremely susceptible to vibration and
shocks. When moving the projector, use the accessory softcase.
When placing the projector inside the softcase, position it so that
the lens is facing upward.

Cautions regarding setting-up

Avoid setting up in places which are subject to vibration
or shocks.
The internal parts can be damaged, which may cause
malfunctions or accidents.
Avoid setting up in places which are subject to sudden
temperature changes, such as near an air conditioner.
The life of the lamp may be shortened.
Do not set up the projector near high-voltage power lines
or near motors.
The projector may be subject to electromagnetic interference.
If installing the projector to the ceiling, ask a qualified
technician to carry out all installation work.
You will need to purchase the separate installation kit (Model
No.ET-PKM1). Furthermore, all installation work should only
be carried out by a qualified technician.
If using this projector at high elevations (above 1 400 m),
set the “FAN CONTROL” to “HIGH”. (Refer to page 43.)
Failure to observe this may result in malfunctions.
Attach the lens cover so that the direction of the “Panasonic”
logo becomes as shown in the figure above.