![](/images/new-backgrounds/1264792/26479271x1.webp)
BRIGHT
This adjusts the darker areas (black areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. The flesh tones are greenish: I button The flesh tones are reddish: H button
SHARPNESS
To soften the picture details: I button
To sharpen the picture details: H button
COLOR TEMP.
COLOR TEMP. STANDARD
[
HIGH
[
LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.
White balance R/G/B (W-BAL R/G/B)
(RGB only)
This is used to adjust the white areas of the picture if they appear colourised.
To make the selected colour lighter : I button
To make the selected colour stronger : H button
AI
AION
[
OFF
ON
The lamp is controlled according to the input signals to project images with the best quality.
OFF
“AI” is disabled.
NOTE:
B“AI” is disabled when “LAMP POWER” is set to “LOW”. (Refer to page 43.)
TV-SYSTEM
[
NTSC
[
NTSC4.43
[
PAL
[
PAL-M
[
PAL-N
[
SECAM
This should normally be set to
“AUTO”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.
NOTE:
BWhen set to “AUTO”, the projector automatically distinguishes between NTSC/NTSC 4.43/PAL/PAL60/