ENGLISH-19
Getting started
Connections

Notes on connections

BRead the instruction manual for each peripheral device carefully before
connecting it.
BTurn off the power supply for all peripheral devices before making any
connections.
BIf the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
BIf there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).
BRefer to the list on page 58 for details on compatible signals which can be
input to the projector.
BOnly one audio system circuit is available for the AUDIO IN L-R jacks, so if
you change the audio input source, you will need to remove and insert the
appropriate plugs.
Computer

Connecting to computer

RGB signal cable
(accessory)