LG Electronics K7F-PIDA, K4F-PIDA manual Read

Chapter 4. BUFFER MEMORY CONFIGURATION AND FUNCTIONS

4.1.2K4F-PIDA Buffer Memory

Address	Function	Descriptions			Default	Read /
(Decimal)					Setting	Write
0	Loop enable/disable	Bit On(1): Enabled			Disabled	R/W
	Specification area	Bit Off(0): Disabled
1	Auto/Manual operation	Bit On(1): Auto			Auto	R/W
	Specification area	Bit Off(0): Manual
2	Forward/Reverse action	Bit On(1): Reverse			Forward	R/W
	Specification area	Bit Off(0): Forward
		Bit On(1) : Set each content of address
	SET data enable/disable	0, 2, 5 to 12, and 21 to 52 to a
3		new setting.			No Setting	R/W
	Specification area	Bit Off(0) : The previous values of			Values
		address 0, 2, 5 to 12, and 21 to
		52 remains without change.
4	Loop run information	Bit On(1) : Run				Read
		Bit Off(0) : Stop				Only
5 to 12	SV of each loop	Setting range	:	0 to 16000	“0”	R/W
13 to 20	PV of each loop	Input range	:	0 to 16000	“0”	R/W
21 to 28	M_MV of each loop	Setting range	:	0 to 16000	“0”	R/W
29 to 36	P of each loop	Setting range	:	0 to 10000	“500”	R/W
37 to 44	I of each loop	Setting range	:	0 to 30000	“1000”	R/W
45 to 52	D of each loop	Setting range	:	0 to 30000	“0”	R/W
53 to 60	MV of each loop	Output range	:	0 to 16000		Read
		Bit 0 On(1) : out-of-range SV
		Bit 1 On(1) : out-of-range PV				Read
61 to 68	Error information of each loop	Bit 2 On(1) : out-of-range M_MV			
		Bit 3 On(1) : out-of-range P				Only
		Bit 4 On(1) : out-of-range I
		Bit 5 On(1) : out-of-range D

4- 2