O PERATING SEQUENCE
1.Open the door and press the power button.
Open the door. Press the power button to see the default setting.
2. Check rinse-aid.
The indicator lights will illuminate if refilling is necessary.
7.Close the door. The dishwasher will start automatically.
8.At the end of the Program.
End is displayed on the digital display for a few seconds and a tone will sound signaling the program completion. The dishwasher automatically switches off for safety and energy savings.
3.Load the dishes after first removing any scraps of food.
Remove any scraps of food in advance. Pull the lower rack out and load the dishes and cutlery in and push it all the way back. Pull the upper rack out and load the cups, glasses, etc.
Caution
Empty the lower rack first and then the upper one, this will avoid water dripping from the upper rack onto the dishes in the lower one.
OPERATING SEQUENCE
4.Ensure that the spray arms can rotate freely.
5.Measure the detergent.
Add the required amount of detergent into the dispenser. Close the detergent dispenser lid.
6. Setting the program.
Select desired program and options.
Before starting, the display window will show the estimated running time of the selected program.
Remember to load all dishes into the selected rack.
The estimated remaining time will be displayed.
If the door is opened during operation, the dishwasher stops.
Once the door is closed, the program will restart from the point where it stopped.
Warning
In general, it is not advisable to open the door while the dishwasher is running. If the door is opened, a safety device stops the machine.
Care should be taken when opening the door immediately following the cycle, as steam may escape.
Auto-Off
When the power is turned on, if you don’t select program or if you don’t close the door after selecting a program, your dishwasher will automatically turn off in 10 minutes.
16
