ABOUT THE AUTOMATIC ICEMAKER
NOTE: Automatic Ice Maker feature is included only in certain models. Please check your product specification.
WARNING
Personal Injury Hazard
Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.
OPERATION INSTRUCTIONS
A
Icemaker
| Feeler Arm |
Cube Size | Power Switch |
Indicator Light | Cube Size |
| Select Button |
NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button.
Every time you press the cube size button, the indicator moves up one light. The higher the light position, the larger the cubes will be. Pressing at highest position returns indicator to lowest position.
WHEN YOU SHOULD SET THE ICEMAKER POWER SWITCH TO O (OFF)
•When the water supply will be shut off for several hours.
•When the ice storage bin is removed for more than a minute or two.
•When the refrigerator will not be used for several days.
NORMAL SOUNDS YOU MAY HEAR
•The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the I (on) position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to O (off).
NOTE: Keeping the power switch in the I (on) position before the water line is connected can damage the icemaker.
•You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills.
PREPARING FOR VACATION
The icemaker will produce eight cubes per cycle— approximately
If the refrigerator is used before the water connection is made to the icemaker, set the power switch to O (off).
When the refrigerator has been connected to the water supply, set the power switch to I (on).
The icemaker will fill with water when it cools to freezing. A
Throw away the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.
It is normal for several cubes to be stuck together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink.
Set the icemaker power switch to O (off)and shut off the water supply to the refrigerator.
If the ambient temperature will drop below freezing, have a qualified servicer drain the water supply system to prevent serious property damage due to flooding from ruptured water lines or connections.
29
